Products of GIPO

Pick-up unit and impact crusher

The building rubble and mixed demolition material (heavily reinforced concrete, wood, plastic, insulation material etc.) are picked up by the feed hopper. The feed material is conveyed via the feed channel with integrated pre-screening into the impact crusher.

The pre-screened material is either transported to the discharge channel via bypass and then to the 1200 wide crusher discharge belt or via a lateral conveyor belt to the stockpile. The material for processing by the impact crusher is crushed and conveyed on the crusher discharge belt to the screen plant.

Gipokombi RC 110 C with integrated separation for light density material (air separation shifter)

Pneumatic classifier

At the time of the transfer from the cross belt to the oversize particle feedback belt the pneumatic classifier separates the lightweight material such as wood, plastic and insulation material from the oversize particles using
a ventilation fan. The lightweight material drops into the receptacle attached on the side. The pneumatic classifier operates using air recirculation with an integrated fine dust filter system.

In the 2 1/2 deck screen machine the end fraction is separated into two different granule sizes specifically so that they can be classified in the screen machine and so that the end result is optimum classification of the final grain. Another advantage With this 2 1/2 deck design is that by using the simple changeover flap integrated in the screen machine it is possible to select a final grain
size for either the larger or smaller machine width of the two differently coupled screen decks without the need to change screens.

GIPOKOMBI RC 110 FDR - Air Shifter